Installation#

This app is BrainAccess Mobile for iOS, the iPhone app for BrainAccess EEG headsets (HALO, MINI, MIDI, MAXI and EXG8). This page covers what you need to run it, the permissions it asks for, and the states shown when scanning cannot start.

Install BrainAccess Mobile from the App Store on your iPhone.

Requirements#

Item

Requirement

iOS

17.0 or newer; iPhone, portrait and landscape. The app is built for iPhone only: an iPad runs it in iPhone compatibility mode, which is not tested

Hardware

Bluetooth Low Energy

Headset

BrainAccess HALO, MINI, MIDI, MAXI or EXG8

Internet

Not required for scanning, connecting, viewing or recording. Used for firmware update checks/downloads

Local network

Not used in this version: LSL streaming is not available in 1.0.0

Language

English

Permissions#

The app asks only when a feature needs access.

Permission

Why

If you deny

Bluetooth

Scan for and connect to BrainAccess headsets

Scanning and connecting are impossible; grant Bluetooth in iOS Settings

BrainAccess Mobile 1.0.0 does not ask for Local Network access, because LSL streaming is not available in this version.

BLE scanning on iOS does not require Location permission. The app does not request Photos access; snapshots and recordings are saved in the app’s local files and leave the app only through explicit sharing/export.

Bluetooth off#

If Bluetooth is off, the device list shows Bluetooth is off with guidance to turn Bluetooth on, and the Scan button is disabled until Bluetooth is available.

Background and screen-off use#

A stream or recording keeps running when you switch to another app or lock the screen: the app uses the iOS Bluetooth-central background mode for its open headset connection. iOS still decides when to suspend or end an app in the background, for example when memory is low, so keep the app open for firmware updates and for sessions that must not be interrupted. If iOS ends the app during a recording, the file written up to that moment stays readable.

See also#